









Endorfy Supremo FM6 850W 80 Plus Gold PCIe 5.1 Fully Modular Power Supply - EY7A012
- Power supply unit power (W)
- 850 W
- Certificate
- 80+ Gold
- Format
- ATX
- Modular power supply
- Yes
- ATX 3.0/3.1 - PCIe Gen 5.0/5.1
- Yes
- PSU length (mm)
- 140 mm
Description
Endorfy Supremo FM6 850W is an ATX power supply from the more serious mid-range class, suitable for modern gaming and work configurations with powerful GPUs. You get 850 W power with 80+ Gold certification and 90% efficiency, which means less energy loss and lower heat. The power supply is fully modular, so you only use the necessary cables and keep the case more organized with better airflow. Support for ATX 3.0/3.1 and PCIe Gen 5.0/5.1 prepares you for both current and next-generation graphics cards.
What you get: a stable power supply with Active PFC and a wide input voltage range of 100–240 VAC, so it works reliably under various network conditions. The DC 3.3/5/±12 V lines provide power for all components – from the motherboard and CPU to powerful GPUs and plenty of storage. Thanks to the PCI-E 5.1 connector, you can directly power modern graphics cards without adapters, while the three PCI-Express 6+2-pin cover older models as well. A 120 mm fan takes care of cooling, combining reasonable airflow with lower noise compared to smaller fans. The black design without RGB is a practical choice if you are looking for a clean and unobtrusive build.
- Power 850 W – sufficient for strong gaming configurations with high-end GPUs and plenty of peripherals, without worrying about power shortages.
- 80+ Gold certification and 90% efficiency – less loss as heat and lower energy consumption under typical load.
- ATX 3.0/3.1 and PCIe Gen 5.0/5.1 – readiness for modern graphics cards, including through the new PCI-E 5.1 connector.
- Fully modular design – you only use the necessary cables, making cable management and airflow in the case easier.
- Rich connector set: 1 x 20+4 PIN, 2 x 4+4-pin ATX/EPS, 3 x PCI-Express 6+2-pin, 1 x PCI-E 5.1, 8 x SATA, and 1 x Molex for flexibility in various configurations.
- 120 mm fan – balanced cooling and lower noise compared to smaller fans, suitable for long gaming sessions and work under load.
- Active PFC and input 100–240 VAC – more stable operation and better utilization of power from the grid in a wide range of conditions.
Who it is suitable for: for gaming and creative builds with powerful GPUs, where a balance between reliability, efficiency, and future compatibility is sought. It is suitable if you plan to upgrade to a PCIe 5.x graphics card or already use one. If you are building an ultra-budget office PC, this power supply is likely above your needs in terms of power and capabilities.
The most sensible aspect here is the combination of 850 W, 80+ Gold efficiency, and ATX 3.0/3.1 + PCIe 5.1 in a fully modular ATX format – a solution that allows you to build both current and future builds with confidence.
Full specifications
- Manufacturer
-
Endorfy
- Product Code
- EY7A012
- Power supply unit power (W)
- 850
- Certificate
-
80+ Gold
- Power supply
- 100 - 240 VAC
- Format
-
ATX
- Efficiency
- 90%
- Fan
-
Fan size:120 mm
- Modular power supply
- Yes
- Output power
-
DC 3.3/5/±12 V
- ATX 3.0/3.1 - PCIe Gen 5.0/5.1
- Yes
- PFC type
- Active
- Color
-
Black
- RGB backlight
- No
- Special features
- Active PFC
- PSU length (mm)
- 140
- Warranty
- 120 months
- Dimensions (mm)
- 140 x 150 x 86
- Connectors
-
1 x 20+4 PIN8 x SATA3 x PCI-Express 6+2-pin2 x 4+4-pin ATX/EPS1 x MolexPCI-E 5.1 x 1
Reviews
No reviews for this product yet. Be the first!