Gigabyte UD1300GM PG5 1300W 80 Plus GOLD Power Supply, Modular, PCIe 5.0 Ready

Gigabyte UD1300GM PG5 is a high-class ATX power supply with 1300W power and 80+ Gold certification, aimed at serious gaming and workstation configurations. The modular design and black casing make it convenient for clean builds with organized cable management. ATX 3.0/3.1 compatibility and PCIe 5.0 Ready prepare it for current and future GPU generations. Combined with a 140mm fan and active PFC, you get stable and efficient power for high-energy-consuming systems.

What you get

With real 1300W and 90% efficiency at typical load, you have enough reserve for a powerful CPU and top-class GPU, without constantly operating at the edge of the power supply's capabilities. ATX 3.0/3.1 and PCIe Gen 5.0/5.1 support, plus PCI-e 16 Pin connector, mean direct compatibility with modern graphics cards, without the need for adapters. The modular design allows you to connect only the necessary cables, reducing airflow resistance in the case and facilitating cooling. With 4 x PCI-Express 6+2-pin, 2 x 4+4-pin ATX/EPS, and enough SATA connectors, you can comfortably power multi-GPU setups, multiple disks, or a large storage system. The input range of 100 - 240 VAC makes it suitable for various electrical installations and environments.

• Power 1300W – provides serious reserve for high-end gaming configurations, overclocking, and heavy workstations.
• 80+ Gold certification with 90% efficiency – less loss in the form of heat and more stable operation during long gaming sessions or rendering.
• ATX 3.0/3.1 and PCIe Gen 5.0/5.1 compatibility – readiness for modern and future GPUs, including those with higher peak loads.
• 1 x PCI-e 16 Pin + 4 x PCI-Express 6+2-pin – enough connectors for a powerful graphics card and additional expansion cards.
• 2 x 4+4-pin ATX/EPS – allows powering high-end motherboards and multi-core processors.
• 8 x SATA + 4 x 4 Pin Peripheral + 1 x Floppy – flexibility for multiple SSDs, HDDs, fan hubs, and older peripherals.
• Modular design and 140mm fan – easier cable management and better airflow in the case for lower temperatures.
• Active PFC and input 100 – 240 VAC – cleaner and more stable power for components, even in less stable networks.

Who it is suitable for

This power supply is a good solution if you are planning a high-end gaming build, a workstation for 3D, rendering, or streaming, where you need a lot of power and reserve for upgrades. It is also suitable for configurations with many disks or several powerful cards. If you are building a more budget system with low consumption, this power will likely be excessive for you.

The most sensible aspect here is the combination of 1300W power, 80+ Gold efficiency, and ATX 3.0/PCIe 5.0 compatibility, which gives you peace of mind that the power supply will not be a limitation now or with future upgrades.