Power supply Inter Tech Argus BPS-850 850W 80 Plus Bronze ATX 3.0

Inter Tech Argus BPS-850 is an 850W ATX 3.0 power supply with 80+ Bronze certification, aimed at mid-range to more serious gaming and workstation configurations. The combination of 850 W power and ATX 3.0 / PCIe Gen 5.0 support allows you to power modern GPUs with the new 12VHPWR connector. Efficiency of up to 90% means less loss and lower energy consumption compared to basic models without certification. The compact length of 140 mm makes it a convenient choice for smaller cases where every space matters.

What you get

With 850W, you can comfortably power a powerful CPU and a high-end gaming GPU, plus several drives and additional fans without worrying about power shortages under load. The presence of 1 x 12VHPWR (12+4) Pin prepares you for newer generation graphics cards, so you won’t need adapters and improvisations. Three PCI-Express 6+2-pin connectors allow for the use of older high-end GPUs or additional cards. With 4 x SATA, you can connect several SSDs/HDDs and peripherals (RGB controllers, pumps, etc.), and the active PFC helps the power supply to be more stable during fluctuations in the network from 100 - 240 VAC. A 120 mm fan takes care of cooling, maintaining a reasonable temperature with normal airflow in the case.

• Power 850 W – suitable for strong gaming and workstation configurations with a modern GPU and plenty of peripherals.
• 80+ Bronze certification with efficiency up to 90% – less loss in heat and more stable operation compared to uncertified PSUs.
• ATX 3.0 / PCIe Gen 5.0 and 1 x 12VHPWR (12+4) Pin – ready for modern graphics cards without the need for adapters.
• 3 x PCI-Express 6+2-pin and 1 x 4+4-pin ATX/EPS – flexibility for powerful GPUs and modern motherboards needing stable CPU power.
• 4 x SATA + 1 x Floppy connector – enough connections for SSDs, HDDs, and older peripherals or controllers.
• ATX format with a length of 140 mm (140 x 150 x 86 mm) – compact chassis that fits easily into shorter mid-tower cases.
• 120 mm fan and Active PFC – better cooling and stability under various voltages in the electrical network.

Who it is suitable for

This power supply is a sensible choice if you are building a mid-range or high-end gaming PC with plans to use a modern GPU with 12VHPWR, but without entering the class of the most expensive PSUs. It is also suitable for workstations with several drives and additional cards. If you are aiming for absolute maximum efficiency and the quietest high-end solutions (Gold/Platinum/etc.), you will likely be looking at a higher class, but for a balanced build, this is a very good foundation.

The most sensible aspect here is the combination of 850 W power, ATX 3.0 with 12VHPWR, and compact dimensions – a flexible power supply that allows you to think about the next GPU upgrade without changing the PSU.