Thermaltake LitePower 650W RGB PSU

Thermaltake LitePower 650W RGB is an ATX power supply, aimed at budget and mid-range gaming and office configurations, where stable power and appearance matter. With 650W, you have enough headroom for a modern mid-range GPU and plenty of peripherals, without going into excessive watts. The built-in RGB lighting and black color help visually tie the case together, especially if you have a transparent side panel. The compact length of 140 mm facilitates installation even in smaller cases.

What you get: a practically usable set of connectors and power that covers a typical gaming build with a discrete graphics card and several drives. With M/B 20+4 Pin and CPU 4+4 Pin, you cover standard motherboards and processors, while the two PCI-e 6+2 Pin connectors are sufficient for most mainstream GPU solutions with one 8-pin or 2x8-pin. The five SATA connectors allow you to connect a combination of SSD, HDD, and possibly some RGB controller or fan hub. Active PFC helps with better efficiency and more adequate behavior during grid fluctuations, while the 120 mm fan at up to 2000±10% RPM provides sufficient airflow for cooling the power supply.

• Power 650W – sufficient for typical gaming and work configurations with a discrete GPU and several drives, without worrying about a lack of watts.
• ATX Format – standard size, compatible with the mainstream mid-tower and full-tower cases on the market.
• Connector configuration: 20+4 Pin ATX, 4+4 Pin CPU, 2x PCI-e 6+2 Pin, 5x SATA, 6x Peripheral 4 Pin, 1x Floppy – flexibility for a combination of modern and older devices.
• 120 mm fan (2000±10% RPM) – provides stable cooling of the power supply under load.
• Active PFC – better power factor and more correct behavior during grid voltage fluctuations.
• RGB lighting – adds color to the configuration, especially useful for cases with a transparent side panel.
• Compact dimensions 150 x 140 x 86 mm – convenient installation even in more compact ATX cases.

This power supply is suitable for budget and mid-range gaming configurations, office machines with higher requirements, and home systems with several drives and a discrete graphics card. If you are after fully modular cable management or an extreme high-end build with the sleeved cables and maximum efficiency, you will likely make a compromise here.

The most sensible thing about this model is the combination of 650W, a decent set of connectors, Active PFC, and RGB lighting in a standard ATX format – practical, easy to integrate, and visually friendly to any RGB build.