Power supply Xigmatek Thor T750M V3 750W 80 Plus Bronze PSU ATX 3.1 - EN43291

This is a power supply Xigmatek Thor T750M V3 750W – a modular ATX unit with 80+ Bronze certification and 750W power, aimed at mid-range to more serious gaming and workstation configurations. With support for ATX 3.0/3.1 and PCIe Gen 5.0/5.1, you are ready for modern GPUs, including those with the new 12V connector. The active PFC and efficiency up to 86% help for more stable power supply and less loss. The black design without RGB lighting is a good choice if you are aiming for a clean, unobtrusive look for the system.

What you get: with 750W, you can comfortably power a powerful CPU plus a strong GPU, several SSDs/HDDs, and additional fans without worrying about power shortages in normal gaming and working scenarios. Thanks to the modular design, you only connect the necessary cables, which simplifies cable management and improves airflow in the case. With four PCI-Express 6+2 pin and one PCI-E 5.1 connector, you have the flexibility to power both older and newer GPUs. Six SATA connectors easily cover several SSDs, HDDs for storage, and even additional devices like controllers or RGB hubs if you use them. A 120mm fan takes care of cooling, maintaining a reasonable balance between noise and temperature.

• Power 750W – sufficient for solid gaming and workstation configurations with one more serious GPU and many peripheral devices.
• 80+ Bronze certification with efficiency up to 86% – less energy loss and lower heat output compared to basic unverified power supplies.
• Support for ATX 3.0/3.1 and PCIe Gen 5.0/5.1 – compatibility with the new generation of graphics cards and standards, without the need for adapters.
• Modular design – you connect only the necessary cables, which simplifies assembly and improves airflow and the appearance of the build.
• Rich set of connectors: 20+4 Pin ATX, 4+4 Pin ATX/EPS x2, PCI-Express 6+2 pin x4, PCI-E 5.1 x1, Molex x3, and SATA x6 for flexibility in various configurations.
• Active PFC – more stable power supply and better power factor at input voltage 100 – 240 VAC, suitable for various electrical networks.
• 120mm fan – keeps the power supply cool under typical gaming load without generating excessive noise.

Who it is suitable for: if you are building a modern mid-range to high mid-range gaming PC or workstation with one powerful GPU and want a modular power supply with ATX 3.1 support, this model is a very good candidate. It is also suitable for an upgrade from an old ATX power supply when planning a jump to a newer graphics card with PCIe Gen 5.1 connector. If you are aiming for extreme high-end with multiple GPUs or very heavy overclocking, you should rather look towards higher wattage.

The most sensible aspect here is the combination of 750W power, ATX 3.1 support, and modular design, which gives you a good balance between future compatibility, a tidy build, and stable power supply for serious gaming or work.