AeroCool fan set 3-in-1 3x120mm - DUO 12 Pro - Addressable RGB with Hub, Remote - ACF3-DU10227.11

This AeroCool DUO 12 Pro 3-in-1 fan kit is an "all-in-one" solution for cooling and lighting your case. You get three 120 mm fans with addressable RGB, controlled via the included H66F RGB hub with 6 ports and remote. They operate at 1000 RPM, which is focused more on quiet mode rather than aggressive cooling. With a low noise level of 19.7 dBA, they are suitable for a build where silence and visuals are important.

What you get

The kit includes 3 fans 120 x 120 x 25 mm, allowing you to fill the entire front intake or combine air intake and exhaust in the case. Each fan has an airflow of up to 33.4 CFM (56.75 m3/h) and static pressure of 1.29 mmH2O – sufficient for standard mesh panels and more open configurations. The Hydraulic bearing and MTBF of 60000 hours mean stable operation for a long time without annoying rattling. They are powered at 12 V, with consumption of about 1.80 W and current up to 0.15 A, so the load on the power supply and hub is minimal. Thanks to the 4 PIN + 3 PIN 5V ARGB connectors, you can connect them either to the motherboard or to the included controller and synchronize the lighting as you prefer.

• Kit of 3 x 120 mm fans, suitable for front, top, or rear mounting in most ATX and mATX cases.
• Addressable RGB lighting via 3 PIN 5V ARGB header or control through the included H66F hub for synchronization with other RGB components.
• Low noise level of only 19.7 dBA, making the system significantly quieter during normal operation.
• Airflow of up to 33.4 CFM (56.75 m3/h) per fan for stable circulation in the case.
• Static pressure of 1.29 mmH2O, suitable for mesh panels and more free air paths.
• Hydraulic bearing and declared MTBF of 60000 hours for longer lifespan and less noise over time.
• Full control package: includes H66F RGB hub with 6 ports and a remote for convenient management of effects and modes.

Who it is suitable for

This kit is suitable if you want balanced and quiet cooling for a mid-range gaming or daily-use computer with an emphasis on RGB visuals. It is ideal for cases with a transparent panel, where light and clean airflow are important, but you are not chasing extreme RPM and noise. If you are looking for maximally aggressive cooling for a very hot high-end build, you may need additional, faster fans.

The combination of quiet operation, addressable RGB, and an included hub with remote makes this kit a convenient and complete choice if you want to solve both the cooling and the lighting of the case at once.