be quiet! LIGHT WINGS 120mm PWM high-speed Triple-Pack Fan 3-in-1 3 x 120mm

This set be quiet! LIGHT WINGS 120mm PWM high-speed is aimed at gaming and enthusiast cases, where you want good airflow, stable pressure, and addressable RGB in one package. You get three 120 mm fans with PWM control and a high RPM range of 200-2500 RPM, so you can adjust them from almost silent mode to aggressive cooling. Although they are high-speed, the noise is up to 31 dBA, which is perfectly acceptable for serious airflow. The black housing and Addressable RGB lighting through a 3 pin ADD-RGB 5V connector give you flexibility for synchronization with the rest of the system.

What you get is a set of 3 pieces 120 x 120 x 25 mm fans, enough to fill the front panel of a typical mid-tower case or to combine intake and exhaust for better airflow. With a maximum 52.3 CFM airflow and static pressure of 2.6 mmH2O, these fans perform well even with denser mesh panels or thicker filters. The Rifle Bearing and MTBF 60000 hours mean long life under 24/7 load, which is important if your machine is constantly on for gaming, streaming, or work. Thanks to PWM via 4 PIN, you can connect the fans to the motherboard and control them according to the temperature curve of the CPU or system, instead of running them constantly at maximum. The RGB connector 3 pin ADD-RGB 5V allows for individual lighting control through a compatible controller or motherboard.

• A set of 3 x 120 mm fans, which is enough for a full front intake or combined intake and exhaust cooling in a standard case.
• Wide RPM range 200-2500 RPM, allowing smooth transition from silent mode to maximum cooling during heavy gaming or stress tests.
• Airflow up to 52.3 CFM, suitable for good overall ventilation of the case and maintaining lower component temperatures.
• Maximum static pressure 2.6 mmH2O, which helps air pass through filters and denser panels without drastic loss of efficiency.
• Noise level up to 31 dBA, well balanced against high RPM, especially if you use an aggressive PWM curve only at high temperatures.
• Rifle Bearing with 60000 hours MTBF, ensuring long life and reliable operation under constant rotation.
• Combination of 4 PIN PWM connector for precise control and 3 pin ADD-RGB 5V for addressable RGB lighting that you can synchronize with other components.
• Low power consumption 0.12 A at 12 V and power 5.4 W, so you don’t overload the fan headers on the motherboard or controller.

Who is this set suitable for? It is suitable if you are building a gaming or enthusiast machine and want both strong airflow and RGB aesthetics without going into extreme custom solutions. It is especially meaningful for mid-tower cases needing serious front intake and PWM control. If you are aiming for an absolutely silent system without any RPM boost, these high-speed fans may be more than you need.

The most sensible thing here is the combination of three fans, high RPM range, good pressure, and addressable RGB, all packed in one set with a 36-month warranty, so you can arrange the cooling and aesthetics of your case at once.