DeepCool FC120 Black ARGB Fan Pack 3-in-1 3x120mm

DeepCool FC120 Black ARGB is a set of three 120 mm case fans aimed at mid-range and more serious gaming configurations, where you want a good balance between airflow, noise, and aesthetics. Each fan is a standard 120 x 120 x 25 mm with a black housing and addressable RGB lighting, which connects to a 3 PIN 5V ARGB header on the motherboard or controller. With a range of 500–1800 RPM, you can run them super quietly at idle and ramp them up when the system is under load. This is a practical 3-in-1 package if you want to fill front intake or refresh the overall airflow in the case.

What you get
With 61.91 CFM airflow and maximum static pressure of 1.83 mmAq, these fans are suitable for both intake through a mesh front panel and exhaust from the top or back. The hydraulic bearing provides better durability and lower noise compared to basic sleeve variants, which is important if your machine runs for long hours every day. The noise level up to 28 dBA means that at normal speeds you will hear them minimally, especially if you set an aggressive fan curve only at high temperatures. The 4 PIN connectors for PWM control and 3 PIN 5V ARGB for lighting give you full control through the motherboard or controller – from a quiet profile for work to more aggressive speeds for gaming with low temperatures. With a total consumption of around 1.56 W per fan at 12 V and 0.13 A, the load on the power supply is negligible, so you can easily plug them into almost any build.

• A set of 3 x 120 mm fans, which is enough to cover front intake or distribute between air intake and exhaust in the case.
• A range of 500–1800 RPM, allowing for very quiet operation at low speeds and serious airflow when lower temperatures are needed.
• Airflow up to 61.91 CFM and static pressure 1.83 mmAq, suitable for cases with filters and denser grilles.
• Noise level up to 28 dBA, which combined with the hydraulic bearing provides a more comfortable and quiet operation of the system.
• Hydraulic bearing for better longevity and smoother rotation compared to regular sleeve bearings.
• 4 PIN PWM connectors for precise speed control through BIOS or motherboard software.
• Addressable RGB (3 PIN 5V ARGB) lighting that you can synchronize with the motherboard or controller for a unified look across the entire build.
• Black coloring and clean design, so they visually fit both stealth and ARGB builds.
• 24 months warranty from DeepCool for peace of mind during long-term use.

Who it is suitable for
This set is a good choice if you are building a gaming or work machine in a mid-tower case and want to improve airflow without raising noise excessively. It is suitable for people who care about synchronized ARGB lighting and want to control the fans through the motherboard with PWM instead of fixed speeds. If you are aiming for extreme overclocking or very dense radiators, you may need more specialized high-static-pressure fans, but for standard configurations, this package is completely adequate.

The combination of hydraulic bearing, decent airflow, and addressable RGB in a set of three makes DeepCool FC120 Black ARGB a practical solution for refreshing the cooling and aesthetics of your case. If you want a balanced set of fans with control and flexibility, this package does the job without unnecessary compromises.