Raijintek AGERAS 12 3x120mm PWM ARGB-3 Fan Set

The Raijintek AGERAS 12 3x120mm PWM ARGB-3 is a set of three 120 mm fans aimed at mid-range gaming and enthusiast cases, where you want a balance between airflow, pressure, and aesthetics. You get black fans with ARGB lighting and 4 Pin PWM control, so you can easily connect them to the motherboard and control the speeds according to temperature. With a range of 800–2200 RPM, they can operate more quietly at idle and ramp up under load. They combine airflow up to 67.38 CFM and static pressure 2.57 mmH2O, making them suitable for both cases and radiators.

What you get

With this set, you get three fans 120 x 120 x 25 mm, which is the standard size for most cases and water radiators. The hydraulic bearing ensures smoother operation and better durability, especially at higher speeds up to 2200 RPM. The noise level of up to 33 dBA is perfectly fine for gaming and work, and at lower speeds, you will hear them minimally. With ARGB lighting and 3 pin ADD-RGB 5V (V-D-NC-G) connector, you can synchronize the lights with other components through the motherboard. The consumption of 2.16 W per fan at 12 V and 0.17 A current minimally loads the headers on the motherboard.

• A set of 3 x 120 mm fans, sufficient to create meaningful airflow throughout a case or fill a 360 mm radiator.
• A range of 800–2200 RPM, providing flexibility – quiet mode under low load and aggressive cooling during gaming or rendering.
• Airflow up to 67.38 CFM, suitable for effectively expelling warm air from the case or supplying fresh air to the radiator.
• Maximum static pressure of 2.57 mmH2O, which helps with dense radiators or thick dust filters.
• Noise level up to 33 dBA, combined with a hydraulic bearing for smoother and more comfortable long-term operation.
• 4 Pin PWM for precise speed control and 3 pin ADD-RGB 5V (V-D-NC-G) for synchronizing ARGB effects with the motherboard.
• Life expectancy of up to 40,000 hours MTBF, which is more than enough for years of daily use in a gaming or work system.

Who is this suitable for?

This set is suitable if you are building a gaming or streaming configuration and want decent cooling and ARGB aesthetics without entering the high-end price range. It is also a good choice for 240/360 mm water cooling when you want to replace stock fans with something with better pressure and lighting. If you are aiming for a completely silent machine or extreme overclocking, you may need more specialized (quieter or more powerful) fans.

The most sensible aspect here is the combination of three 120 mm fans with PWM control, a good balance between CFM and pressure, and ARGB, allowing you to cover both cooling and the appearance of the case with one set.