Thermal Grizzly Carbonaut 32 x 32 x 0.2 mm thermal pad

Thermal Grizzly Carbonaut is a thermal pad for people who want a constant, predictable thermal contact surface without dealing with pastes. This model is thin, with a thickness of 0.2 mm, and is suitable for situations where tolerances are tight and any excess "raising" of the cooler is a problem. With thermal conductivity of 62.5 W/mk, you get serious heat transfer compared to typical silicone pads. The size of 30 x 30 mm makes it convenient for chips, IHS, or tiles that fall within this format.

What you get: consistent thermal performance that is not affected by how well you "spread" the paste, because here you simply lay down the pad and tighten the cooler. The thickness of 0.2 mm is sufficient to compensate for slight unevenness and tolerances between surfaces, but without imposing a strong compromise on pressure and contact. The temperature limit of -250 °C to +150 °C covers normal and even more serious loads for CPU/GPU and other components, without the risk of the pad thermally degrading. With this amount of 4 g, you have a working pad with well-defined dimensions, without needing to measure and cut by eye. This is a "put and forget" solution, which is convenient for frequent removals and tests of coolers.

• Thermal pad from Thermal Grizzly, aimed at stable and predictable heat exchange without the mess of classic thermal pastes.
• Size 30 x 30 x 0.2 mm, which is convenient for standard contact surfaces and allows easy installation without additional cutting.
• Thermal conductivity 62.5 W/mk, providing effective heat dissipation compared to mass thermal pads.
• Operating temperature range -250 °C / +150 °C, suitable for a wide range of cooling scenarios – from cold environments to heavily loaded components.
• Weight 4 g, which corresponds to one pad in the specified size, without the need to divide or dose the material.
• Thickness 0.2 mm, which balances between filling gaps and maintaining good mounting pressure of the cooler.
• Category Thermal pad, which means reusable upon disassembly, unlike typical thermal paste.

This thermal pad is suitable if you frequently change coolers, test hardware, or simply want a cleaner and repeatable alternative to paste for components within the temperature limit. It is a good choice for enthusiasts and service work where quick installation and reusability are important.

The most sensible aspect here is the combination of thin profile 0.2 mm, high thermal conductivity, and wide temperature range – this makes Carbonaut a practical and predictable choice for stable thermal contact.