Thermal Grizzly Carbonaut 38 x 38 x 0.2 mm thermal pad

Thermal Grizzly Carbonaut 38 x 38 x 0.2 mm is a flexible thermal pad for CPU or other components where you want stable and predictable contact without the hassle of paste. It is positioned more in the enthusiast/modder segment – for people who often remove coolers or test different configurations. With a size of 38 x 38 x 0.2 mm and thermal conductivity of 62.5 W/mk, you get serious efficiency in heat transfer. The operating temperature range of -250 °C to +150 °C comfortably covers typical PC scenarios.

What you get

This is a ready thermal pad – you cut/select it to fit and simply place it between the chip and the cooler, without dealing with even application and cleaning of thermal paste every time you remove it. The thickness of 0.2 mm is suitable for configurations where the gap between surfaces is minimal and you seek maximum contact area. The thermal conductivity of 62.5 W/mk is at a level that allows very good heat transfer with proper pressure on the cooler. Its temperature range makes it stable at both low and high temperatures, without hardening or flowing like classic pastes.

• Thermal pad from Thermal Grizzly, aimed at enthusiasts who want multiple installations without loss of efficiency.
• Size 38 x 38 x 0.2 mm, suitable for covering modern CPU lids or other square chips with similar dimensions.
• Thickness 0.2 mm, which is optimal for well-fitting coolers and minimal gap between the two surfaces.
• Thermal conductivity 62.5 W/mk for effective heat transfer from the chip to the cooler under stable pressure.
• Limit temperature -250 °C / +150 °C, which ensures stable operation in a wide temperature range – from extremely cold to typical high loads.
• Quantity 6 g, enough for one pad in the specified size and possibly relocation/reinstallation.
• No standard warranty (0 months), but also no components that would “fail” under normal use.

Who it is suitable for

It is suitable if you often change coolers, test different configurations, or simply do not want to clean old thermal paste with every intervention. It is also suitable for systems where it is important for everything to be clean and organized, and the installation – quick and repeatable. If you are chasing absolutely minimal degrees on the edge for heavy overclocking, you might prefer thermal paste, but here you gain convenience and consistency.

The combination of high thermal conductivity, precise dimensions 38 x 38 x 0.2 mm, and a wide temperature range makes this Carbonaut a convenient, “set-and-forget” option for serious PC builds and frequent maintenance.