Thermal pad Thermal Grizzly Minus Pad 8 120 x 20 x 0.5 mm 2 pcs

This thermal pad Thermal Grizzly Minus Pad 8 is a solution for situations where you need stable heat transfer between chip and cooling, but with precisely controlled thickness of 0.5 mm. It is suitable for GPU, VRM, memory, and other components where the thermal gap is fixed and paste does not work. With thermal conductivity of 8 W/mk, you get serious heat dissipation compared to cheap blue pads. The package includes 2 pieces of pads sized 120 x 20 mm, giving you enough area for several modules or entire rows of chips.

What you get

Each pad is sized 120 x 20 x 0.5 mm, which means you can cut it to size for VRAM chips, VRM areas, or other elements on the board without worrying that it will run out after the first attempt. The thickness of 0.5 mm is suitable for cases where the distance between component and radiator is small and you want maximum tight contact without overstressing the cooling. The thermal conductivity of 8 W/mk helps achieve lower temperatures under prolonged load, especially with hotter chips. The temperature range of -100° C to +250° C ensures that the pad remains stable at both low and very high operating temperatures without running or hardening excessively. You get a thermal solution without warranty commitments (0 months), which is normal for a consumable of this type.

• Thermal pad from Thermal Grizzly, aimed at those who want more serious cooling than standard pads.
• Set of 2 pieces of pads provides enough material for several components or a complete refresh of thermal pads in a card or laptop.
• Size 120 x 20 mm allows easy cutting of strips for VRAM, VRM, and other chips on the board.
• Thickness of 0.5 mm is suitable for small gaps between chip and radiator, where you need precise fitting.
• Thermal conductivity 8 W/mk provides effective heat dissipation compared to basic thermal pads.
• Temperature range -100° C / +250° C makes the pad suitable for both standard use and more extreme scenarios.
• Product code TG-MP8-120-20-05-2R helps you easily recognize and reorder it when needed.

Who it is suitable for

It is suitable if you are replacing old, worn thermal pads on GPU, console, laptop, or other hardware and want better contact and lower temperatures. With a thickness of 0.5 mm, it is particularly suitable for situations where the measurement of the gap is precise and you cannot afford too thick or too thin a pad. If you need greater thickness for larger gaps, this model may not be the best choice.

The combination of 8 W/mk, precise thickness of 0.5 mm, and two long pads 120 x 20 mm makes it a practical choice for a serious thermal refresh of your system without unnecessary complications.