Thermal pad Thermal Grizzly Minus Pad 8 120 x 20 x 0.5 mm

Thermal Grizzly Minus Pad 8 120 x 20 x 0.5 mm is a high-quality thermal pad aimed at more demanding configurations and situations where you want stable contact between chip and cooling. With thermal conductivity 8 W/mk and thickness 0.5 mm, it is suitable for components where paste is not convenient or does not provide an even layer. The size 120 x 20 mm gives you enough material for several smaller modules or one longer element like a VRM zone or RAM module with a heatsink. This is a product for people who want precision in cooling and do not compromise on thermal contact.

What you get is a flexible thermal pad that you can cut to size according to the specific chip or area. With a temperature limit of -100° C to +250° C, you can safely use it in more extreme scenarios – from heavily cooled systems to components that are steadily heating under load. The thickness of 0.5 mm helps compensate for smaller height differences between chip and heatsink without losing contact or having to tighten screws to the max. The thermal conductivity of 8 W/mk is serious for a thermal pad and is a good step up from cheap poorly conductive pads that often come factory-installed. One piece gives you enough material to replace several OEM thermal pads on the GPU or motherboard and improve the overall temperature picture.

• The manufacturer Thermal Grizzly is focused on cooling, and this is evident in the quality and consistency of the thermal pad.
• The type thermal pad is convenient for components with uneven surfaces where thermal paste cannot provide a stable and even layer.
• Thermal conductivity 8 W/mk means significantly better heat exchange than mass OEM pads and potentially lower temperatures of the chips.
• The size 120 x 20 mm allows you to cut it for several separate VRM zones, memory chips, or other elements on the board.
• Thickness 0.5 mm is a versatile choice for many GPU and motherboard configurations where the distance between chip and heatsink is small.
• The temperature limit of -100° C to +250° C provides comfort at both very low and very high operating temperatures.
• You get 1 pc. thermal pad with product code TG-MP8-120-20-05-1R, ready for installation without the need for additional preparation.

Who is this thermal pad suitable for? For people who service their own GPU, laptop, or motherboard and want to replace old, dried out, or low-quality pads. It is also suitable if you are doing a more serious custom build and want control over every detail in cooling. If you are aiming for the cheapest repair and do not care about 2-3°C, you may not appreciate the difference.

The strongest point of this model is the combination of 8 W/mk thermal conductivity, universal 0.5 mm thickness, and wide temperature range – you get a reliable, predictable thermal pad that works well in quite serious scenarios.