Thermal pad Thermal Grizzly Minus Pad 8 120 x 20 x 1.0 mm

Thermal Grizzly Minus Pad 8 is a thermal pad for those who want to lower temperatures where thermal paste simply doesn't work – VRM, GPU memory, chips around the socket, consoles, mini PCs. This is more of a mid- to high-end cooling solution, with a reasonably high thermal conductivity of 8 W/mk and a convenient size of 120 x 20 x 1 mm. It operates stably in a wide temperature range from -100° C to +250° C, making it suitable for more serious tuning or even experiments with extreme cooling. It comes as a single sheet that you can cut according to the needs of the specific component.

What you get

With this thermal pad, you get a dense, compressive pad that fills the gap between the chip and the heatsink, where the metal contact is not ideal or is completely missing. The thickness of 1.0 mm is universal for most VRM coolers and backplates of graphics cards, where there are often irregularities and different heights of components. The length of 120 mm and width of 20 mm allow you to cut several smaller pieces for different areas of the motherboard or GPU board from one pad. The thermal conductivity of 8 W/mk means stable heat transfer to the heatsink, which helps lower temperatures and reduce thermal throttling. The range of -100° C to +250° C gives you peace of mind that the material will not break down or harden drastically under normal or heavier operating conditions.

• Thermal pad from Thermal Grizzly, aimed at more serious PC enthusiasts and those who tweak cooling beyond factory settings.
• Thermal conductivity of 8 W/mk, which ensures effective heat transfer from chips and VRM to the heatsink.
• Operating temperature range of -100° C to +250° C, suitable for everything from standard gaming machines to more extreme cooling solutions.
• Size 120 x 20 mm, which allows you to cut it into several smaller pieces for different components in the system.
• Thickness 1.0 mm, good for filling larger gaps between PCB and heatsink without over-tightening screws.
• Available as 1 pc. pad with product code TG-MP8-120-20-10-1R, so you can easily know exactly what you are ordering or replacing.
• Category thermal pad / thermopad, making it a logical choice for maintenance, upgrade, or modding of cooling.

Who it is suitable for

It is suitable if you disassemble graphics cards, replace factory thermal pads, upgrade VRM and memory cooling, or want to lower a few degrees in the stressed areas of the system. It is also a good choice for more compact builds and consoles, where space is limited and the thermal pad is often the only option. If you are looking for a “set it and forget it” solution without any tinkering with the hardware – this is probably not your product.

The combination of 8 W/mk thermal conductivity, universal size 120 x 20 x 1 mm, and wide temperature range makes this thermal pad a very flexible tool for anyone who loves to optimize their cooling themselves.