Thermal pad Thermal Grizzly Minus Pad 8 120 x 20 x 2.0 mm

Thermal Grizzly Minus Pad 8 120 x 20 x 2.0 mm is a quality thermal pad for cooling components where classic thermal paste is not practical. With a thickness of 2.0 mm and a size of 120 x 20 mm, you can use it for VRM, memory chips, SSD controllers, and other elements around the GPU and CPU. The thermal conductivity of 8 W/mk is more than sufficient for serious loads, especially with modern graphics cards and motherboards. This is a typical choice if you are re-padding a graphics card or modifying cooling in a custom build.

What you get

You get a thermal pad with a size of 120 x 20 x 2 mm, which gives you flexibility – you cut exactly as much as you need for different areas of one card or several components. The thickness of 2.0 mm helps fill larger gaps between the heatsink and chips, where thinner pads do not make good contact. With thermal conductivity of 8 W/mk, you can expect stable heat transfer from critical elements to the cooler, which directly reduces temperatures and the risk of throttling. The operating temperature range of -100° C to +250° C provides peace of mind at both low and very high temperatures, whether it’s gaming, rendering, or 24/7 load.

• Thermal pad with thermal conductivity of 8 W/mk, which ensures efficient heat transfer from the chips to the heatsink.
• Size 120 x 20 mm, suitable for cutting into several smaller pieces for VRAM, VRM, or other components.
• Thickness 2.0 mm, ideal for cases where there is a larger gap between component and cooling.
• Wide temperature range -100° C / +250° C, covering both low and extremely high operating temperatures.
• One piece in the package (1 pc), which is convenient if you need a specific amount for a particular project or card.
• Manufacturer Thermal Grizzly – a brand focused specifically on enthusiasts and people who tweak cooling and overclocking.
• Product code TG-MP8-120-20-20-1R, useful if you want to order the same model again or compare it with other thicknesses.

Who is it suitable for

This thermal pad is suitable if you are refreshing the cooling of a graphics card, tightening the temperatures of VRM or SSD, or simply assembling a more serious gaming/workstation build and want control over the thermals. It is also suitable for more precise mods where you need thicker material for secure contact. If you are looking for ultra-thin pads for very small gaps, you might want to look at a smaller thickness.

The combination of 2.0 mm thickness, 8 W/mk thermal conductivity, and stable temperature range makes this Thermal Grizzly Minus Pad 8 a reliable foundation when you want to squeeze a bit lower temperatures from your hardware without unnecessary compromises.