Thermal Grizzly Minus Pad 8 Thermal Conductive Pad, 100 x 100 x 0.5 mm

Thermal Grizzly Minus Pad 8 is a thermal conductive pad aimed at more demanding builds, where you want better temperature control than standard OEM pads. The size 100 x 100 x 0.5 mm gives you enough material to cut it exactly according to your needs – VRMs, memory chips around the GPU, M.2 SSDs, and other components. With thermal conductivity of 8 W/mk, this thermal pad is suitable for situations where factory solutions no longer work optimally. You get flexibility, precision, and stable thermal contact without unnecessary complications.

What you get

With a thickness of 0.5 mm, you can compensate for slight differences in the distance between the chip and the cooling element, where thermal paste alone is not sufficient. The large format 100 x 100 mm allows you to cut several pads for different components from one sheet – practical when working on a whole build or refreshing an old GPU cooling. The thermal conductivity of 8 W/mk means more efficient heat transfer to the radiator compared to mass-produced cheap pads, which helps achieve lower temperatures under load and more stable operation during long gaming sessions or rendering. As a thermal pad, the solution is also cleaner and easier to install compared to attempts to "save the situation" with just paste on uneven surfaces.

• Thermal conductive pad from Thermal Grizzly, aimed at more serious cooling solutions and upgrades.
• Type thermal pad that provides stable contact between chips and radiators where thermal paste is not sufficient.
• Thermal conductivity 8 W/mk, suitable for improving factory cooling of GPUs, VRMs, and memory modules.
• Large format 100 x 100 mm, allowing you to cut several pads for different components from one sheet.
• Thickness 0.5 mm, convenient for filling small gaps between the component and the cooling element without raising it too much.
• Suitable for M.2 SSDs, VRM sections, and memory chips where even and reliable thermal contact is needed.

Who it is suitable for

This thermal pad is a good option if you are upgrading or refreshing the cooling of a GPU, if you are working on the VRMs of a motherboard, or improving the cooling of an M.2 SSD in more demanding systems. It is also suitable for enthusiasts who often open and service hardware and want to have a versatile piece of material for various tasks. If you are looking for a super budget option for a one-time small intervention, it might be a bit overkill in size, but for a serious build or several machines, it is quite practical.

The most sensible aspect here is the combination of 8 W/mk thermal conductivity and the large size 100 x 100 x 0.5 mm, which gives you both efficiency and the freedom to adapt it exactly for your hardware.