Thermal Grizzly Minus Pad Advance thermal pad, 120 x 20 x 1.5 mm - 4 pcs.

Thermal Grizzly Minus Pad Advance is a thermal conductive pad aimed at people who want better control over the temperatures of their components – from GPU and VRM to SSD and laptops. In the package, you receive 4 pieces of pads sized 120 x 20 x 1.5 mm, which provides quite a bit of flexibility for various applications. The soft structure of this type of pads helps fill the gaps between the chip and the heatsink, especially when there are uneven surfaces or different heights of the components. The brand Thermal Grizzly is well-known in enthusiast circles, so here we are talking about a product aimed at more precise modifications and upgrades, rather than just "another" thermal pad.

What you get

Thanks to the shape 120 x 20 mm, each pad can be easily cut along the length or width to fit VRM areas, memory chips around the GPU, or M.2 SSD heatsinks. The thickness 1.5 mm is useful in cases where standard 1.0 mm pads do not make good contact between component and heatsink – for example, in custom cooling solutions or when replacing factory pads on graphics cards. Since you receive 4 pieces, you can service several devices or do a complete overhaul of the cooling in one PC – GPU, chipset, MOSFETs, even hotter areas in mini PCs or laptops. This type of product is particularly meaningful if you are aiming for lower temperatures and more stable behavior under load, without requiring complex mods to the hardware.

• A set of 4 pieces of thermal conductive pads, enough for several components or an entire build with more cooling zones.
• Size 120 x 20 mm for each pad, providing enough length for VRM rows, memory modules on the GPU, or M.2 SSD heatsinks.
• 1.5 mm thickness, suitable for bridging larger gaps between heatsink and chip when 1.0 mm does not make stable contact.
• A form factor that can be easily cut with a knife or scissors, allowing you to shape the pads exactly according to the dimensions of the specific component.
• Manufacturer Thermal Grizzly – a brand often used in modding and enthusiast circles for upgrading factory thermal solutions.
• Suitable for use with GPU, VRM, chipsets, and other elements where stable heat transfer to the heatsink or case is needed.

Who it is suitable for

This thermal pad is suitable if you enjoy tinkering with hardware – replacing factory pads on a graphics card, improving cooling on an M.2 SSD, or tightening temperatures on VRM in more demanding gaming and workstation configurations. If you just want "something cheap for every case" and don't want to deal with cutting and measuring, it may seem unnecessary. For anyone aiming for lower temperatures and quieter fan operation through better thermal contact, this is a logical step.

The combination of four pads sized 120 x 20 x 1.5 mm provides quite a bit of freedom to optimize cooling in key areas of the system, without compromising contact or coverage. A practical choice if you want more control over temperatures and are willing to spend some time on precise installation.