Thermal Grizzly Putty Basic Thermal Paste - 30g

TG Putty is an electrically insulating alternative to conventional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences, making it an ideal substitute for GPU thermal pads. Graphics cards typically come with several types of thermal pads of different thicknesses from the factory, requiring different pads during replacement or when converting the GPU cooler to a water cooler.

Applying TG Putty is done with the included spatulas, which also allow application over a large area. TG Putty can compensate for height differences from 0.2 mm to 3.0 mm.

TG Putty is available in three variants, which differ mainly in their thermal conductivity:
TG Putty Basic: Medium thermal conductivity
TG Putty Advance: Good thermal conductivity
TG Putty Pro: Excellent thermal conductivity

To modify a single smaller graphics card without an active backplate (e.g., GeForce GTX 1060), approximately one 30-gram container of TG Putty is required. For larger graphics cards, such as GeForce RTX 4090, one 30-gram container is usually sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the back side, there is often a uniform, larger gap between the PCB and the backplate on larger graphics cards. In this case, approximately two 30-gram containers are needed to completely fill this gap.

IMPORTANT!
TG Putty is not suitable for use on processors (IHS or Direct Die) or directly on the GPU matrix!
Before application, the target surface must be carefully cleaned and degreased, for example, using TG Cleaning Wipes or conventional isopropyl alcohol.