FSP Group NANO FIT 800 UPS

FSP Group NANO FIT 800 is a compact line-interactive UPS, aimed at home and office use, where you need reliable protection for several devices without unnecessary extras. The capacity of 800VA / 480W is fully sufficient for one desktop, monitor, and peripherals or for network equipment. The output voltage shape is simulated sine wave, which is standard for this class. The lack of an LCD keeps things simple, while the static display with color indicators clearly shows you what mode the UPS is operating in.

What you get

With this UPS, you get stabilized output voltage 220/230/240 Vac with regulation in battery mode of ±10%, which helps keep your equipment away from spikes and drops. The input range 180–270 Vac with automatic recognition of 50/60Hz frequency allows it to handle quite a “dirty” network before switching to battery. The built-in battery 12V / 5Ah (1 piece) charges to 90% in about 8 hours, so after a power outage, you are relatively quickly protected again. The switching time from mains to battery is typically 2–6 ms (maximum 10 ms), which is completely acceptable for standard PC configurations and office equipment. The audible alarms for different modes give you a clear signal of what is happening, even if you are not looking at the device itself.

• Line-interactive type with capacity 800VA / 480W, suitable for desktop + monitor, small server, or network equipment.
• 6x Schuko output connectors, allowing you to connect several devices simultaneously without the need for an additional surge protector.
• Output voltage 220/230/240 Vac with regulation in battery mode of ±10% for more stable power during drops and fluctuations.
• Fast switching to battery with time 2–6 ms (up to 10 ms maximum), so that the equipment does not restart during brief interruptions.
• Output voltage shape in battery mode: simulated sine wave, compatible with mass-market PC and office equipment power supplies.
• Built-in battery 12V / 5Ah x 1 with typical recharge time of about 8 hours to 90% capacity.
• Clear indicators: green LED in line mode, yellow blinking in battery mode, and red in case of error, plus various audible signals for battery, overload, and fault.
• Full protection against overload, deep discharge, and overcharging, with noise level below 40 dB, suitable for quiet office or home environment.
• Compact dimensions 305 x 158.5 x 95 mm and weight of only 2.9 kg, so you can easily fit it under your desk or next to the network equipment cabinet.
• Warranty of 24 months from the manufacturer FSP Group for peace of mind during long-term use.

Who it is suitable for

The FSP Group NANO FIT 800 UPS is a good choice if you want basic but meaningful protection for a home or office computer, router, NAS, or small server. It is suitable if your network often “plays” and you need to preserve data and safely shut down equipment during power outages. It is not the optimal choice if you are looking for long battery life or need a pure sine wave for more sensitive devices.

The combination of 800VA capacity, six Schuko outputs, fast switching, and reasonable protection in a compact body makes this UPS a practical choice for everyday protection of your equipment without unnecessary complications.