1stPlayer F1 Bulk Fan 120mm

1stPlayer F1 Bulk Fan 120mm is a basic 120 mm case fan aimed at budget and mid-range configurations where you seek a good balance between airflow and noise. With 41.9 CFM at only 23.2 dBA, you get decent cooling without annoying whirring. The fan comes with Fixed RGB lighting, adding color to the case without dealing with complex control. The classic 120 x 120 x 25 mm size and 3 PIN connector make it easy to integrate into most cases and motherboards.

What you get: at 1100 RPM, this fan is tuned more for quiet operation than aggressive cooling, making it suitable for front intake or exhaust in systems without serious overclocking. The airflow of 41.9 CFM is fully sufficient for standard gaming and office configurations, especially if you install 2-3 of these in the case for better airflow. The Sleeve Bearing bearing is typical for the budget class – it works well in horizontal or vertical mounting, but is most gentle if the fan is not constantly at max speed. The power supply is standard 12 V, with a consumption of only 2.83 W and 0.23 A, so it does not load the power supply or fan headers on the motherboard in any way. The Fixed RGB lighting provides a constant effect without the need for additional controllers or software.

• Standard size 120 x 120 x 25 mm, making it compatible with almost all modern PC cases.
• Airflow of 41.9 CFM, suitable for general airflow – both for intake and exhaust fan.
• Low noise level of only 23.2 dBA, which is a good option if you are looking for a quieter system.
• Speed of 1100 RPM, focused on balancing cooling and acoustic comfort.
• Sleeve Bearing bearing for a budget solution, adequate for daily use and moderate load.
• 3 PIN connector for standard connection to a motherboard or fan hub with voltage control.
• Fixed RGB lighting that adds color to the case without the need for additional configuration.
• Low consumption – only 2.83 W at 12 V / 0.23 A, which spares the fan headers and power supply.
• Color black, so it visually fits in most builds, regardless of theme.
• 24 months warranty, providing peace of mind for long-term use.

Who it is suitable for: this fan is a good choice if you are building a budget or mid-range build and need an inexpensive but reasonably quiet solution for airflow. It is suitable for front/back fans in cases with normal load – gaming, office, multimedia. It is not the most logical choice if you are pursuing extreme overclocking or a super tightly packed high-end build where you need higher static pressure and higher RPM.

The combination of low noise, stable airflow, and Fixed RGB in this 120 mm format makes the 1stPlayer F1 a practical choice when you simply want to improve cooling and add a bit of visual appeal without complicating the build and budget.