1stPlayer F1 White Bulk Fan 120mm Fixed RGB

1stPlayer F1 White 120mm is a basic case fan that combines decent airflow with low noise levels and fixed RGB lighting. With a size of 120 x 120 x 25 mm and a standard 3 PIN connector, it is easy to install in almost any case. The white color and Fixed RGB backlighting make it a good choice if you want a clean and bright build without complicated RGB configurations. It is suitable for both front intake and rear exhaust in more standard configurations.

What you get

At maximum 1100 RPM, the fan provides an airflow of 41.9 CFM, which is more than enough for an office or gaming system with mid-range hardware. The noise level of only 23.2 dBA means your machine will remain quiet even under prolonged load. With a consumption of 2.83 W and current 0.23 A, the load on the power supply is minimal, even if you install several such fans. The Sleeve Bearing bearing is typical for more affordable models – it works well in horizontal or vertical mounting under normal temperatures. The Fixed RGB backlighting is fixed in effect, so you simply plug it in and get a constant look without needing an additional RGB controller or software.

• Standard size 120 mm, making it compatible with common fan positions in most PC cases.
• Airflow of 41.9 CFM, sufficient to improve air circulation in a typical gaming or office configuration.
• Low noise level of only 23.2 dBA, suitable for a quiet system in a room where you work, stream, or sleep.
• Speeds up to 1100 RPM, balancing between cooling and acoustic comfort without excessive noise.
• Sleeve Bearing bearing, providing good performance under normal conditions and allowing for a more affordable price.
• 3 PIN connector, suitable for standard fan headers on motherboards with voltage control.
• Fixed RGB lighting and white color, adding a visual accent without dealing with effect configuration.
• Low consumption of 2.83 W and current 0.23 A, allowing you to use several units without worries about load.
• 24 months warranty, providing peace of mind for long-term use.

Who it is suitable for

This fan is suitable if you are building a budget or mid-range build and want a quiet system with basic RGB output. It is ideal for cases with a window, where the white color and backlighting will stand out without needing to synchronize addressable effects. If you are aiming for extreme cooling or full control over RGB, you would likely look towards higher-end models.

The combination of quiet 1100 RPM, airflow of 41.9 CFM, and clean white design with Fixed RGB makes 1stPlayer F1 White a good choice for a calm, organized, and visually pleasing airflow in your case.