Fan AeroCool 120 mm - Frost 12 - Fixed RGB - ACF3-FS10117.11

The AeroCool Frost 12 fan with dimensions 120 x 120 x 25 mm is a budget cooling solution for cases, combining basic performance with fixed RGB lighting. It operates at up to 1000 RPM, making it a quieter option for everyday gaming or office configurations. The black housing and RGB effect add a touch of color to the case interior without the need for complex RGB control. With 3-pin and Molex connectors, you have flexibility in how to connect it depending on the power supply and motherboard.

What you get is a fan with 24.8 CFM airflow and static pressure of 1.08 mmH2O, which is perfectly fine for general case airflow – front intake or rear/top exhaust. At 23.7 dBA noise, you can expect relatively quiet operation, especially suitable for systems that are often on idle or under moderate load. The Sleeve Bearing keeps the price low, and with up to 40 000 hours MTBF, it is a reasonable choice for long-term use in home or office PCs. Consumption is only 3.24 W at 12 V and 0.27 A, which practically does not load your power supply, even if you install several such fans. The fixed RGB lighting is for you if you want some color but do not care about complex synchronization and software settings.

• Standard size 120 x 120 x 25 mm, making it compatible with almost all modern PC cases.
• Maximum speed of 1000 RPM for a balanced ratio between airflow and low noise.
• Airflow 24.8 CFM / 42.14 m3/h, suitable for general case cooling as an intake or exhaust fan.
• Noise level 23.7 dBA, which is good for quiet configurations operating often close to you.
• Sleeve Bearing type bearing with declared MTBF 40 000 hours for prolonged operation under standard conditions.
• Fixed RGB lighting for a basic visual effect without the need for an additional controller or software.
• Dual 3-pin and Molex connectors, giving you the freedom to connect it either to the motherboard or directly to the power supply.
• Low consumption of 3.24 W at 12 V / 0.27 A, so you can safely add several fans to the system.

This fan is suitable if you are building a budget or mid-range computer and need additional case cooling without serious noise and without exceeding the budget. It is a good choice for a front or rear fan in a gaming or office configuration where you want some RGB look but do not care about addressable effects and precise fan control. It is not the best option if you are chasing maximum static pressure for dense radiators or a super aggressive airflow build.

The combination of standard 120 mm form factor, fixed RGB, low consumption, and flexible connectors makes the AeroCool Frost 12 a practical and easy-to-integrate choice for simple but effective case cooling.