AeroCool Frost 8 Fan 80 mm Fixed RGB - ACF1-FS10117.11

This AeroCool Frost 8 (ACF1-FS10117.11) fan is a compact 80 mm case cooler aimed at budget and simple configurations where you need additional airflow without much noise and without unnecessary extras. With 1500 RPM and airflow of 21.9 CFM, it is suitable for general ventilation of smaller cases or for refreshing airflow around warmer areas. Fixed RGB lighting adds a basic visual effect, without the need for software or additional control. The black housing and standard connectors make it easy to fit into almost any system.

What you get is an 80 x 80 x 25 mm fan that you can install on both the front and rear panel of the case to improve overall cooling. At 21.9 dBA noise, the fan is relatively quiet for this size, so it won’t be noticeably loud in a normal room. The airflow of 21.9 CFM and static pressure of 0.81 mmH2O are OK for case ventilation and for expelling warm air outside, but are not aimed at heavy radiators or very dense filters. The 3 PIN + Molex connector gives you flexibility – you can connect it directly to the motherboard or straight to the power supply if you have no free fan headers. Fixed RGB lighting is always active, with no settings – you plug it in, connect it to 12 V, and it works.

• Compact form factor 80 x 80 x 25 mm, suitable for smaller cases or as an additional fan in areas with poor airflow.
• Rotation speed of 1500 RPM, providing a balance between cooling and noise for standard configurations.
• Airflow of 21.9 CFM, sufficient for general ventilation and expelling warm air from the case.
• Static pressure of 0.81 mmH2O, suitable for light obstacles like meshes and filters, but not for very dense radiators.
• Low noise level of 21.9 dBA, so the fan does not dominate over the remaining noise from the system.
• Connectors 3 PIN and Molex, giving you the choice between control through the motherboard or direct power from the PSU.
• Fixed RGB lighting and black color for a simple, yet visually refreshed interior look of the case.
• Sleeve Bearing bearing for a budget solution, suitable for systems without 24/7 load.
• 12 V / 0.25 A power supply, completely standard for case fans and easy to integrate.
• 24 months warranty from the manufacturer AeroCool for peace of mind during long-term use.

Who is this fan suitable for? For budget or older configurations where you need a basic improvement in airflow in a small case, without entering expensive solutions. It is also suitable if you just want an additional fan with easy connection via Molex and a simple RGB effect. It is not the optimal choice if you are aiming for maximum static pressure for thick radiators or a quiet high-end build focused on premium bearings.

The most sensible thing about this model is the combination of 80 mm form factor, 3 PIN + Molex connectivity, and fixed RGB, which gives you an easy, cheap, and plug-and-play way to improve cooling and the visual appearance of your case.