be quiet! LIGHT WINGS LX 120mm PWM high-speed Fan - BL123

be quiet! LIGHT WINGS LX 120mm PWM high-speed is a 120 mm fan aimed at more serious gaming and enthusiast configurations, where you want both stable cooling and nice ARGB aesthetics. It operates in the range of 300–2100 RPM, giving you broad control – from quiet idle to aggressive airflow under load. At maximum, it provides up to 61.8 CFM and static pressure of 2.51 mmH2O, suitable for radiators as well. Despite the higher speed, the noise is kept under control at up to 30.9 dBA.

What you get

This fan is designed for both case cooling and radiator cooling, which means you can use it on the front/top panel as well as on AIOs. Thanks to 9 optimized blades with precise angles, you get high airflow and static pressure – useful for denser mesh panels or thick radiators. The Innovative closed loop motor design keeps the RPM stable regardless of air resistance, so your profiles in BIOS or software behave predictably. The Rifle Bearing balances reliability and noise, and at 12 V and up to 5.4 W consumption, you can put several of these on a well-sized fan hub. Add Addressable RGB with 16 LEDs, and your case will not only breathe well but also look complete.

• 120 x 120 x 25 mm standard size that fits most cases and 120 mm radiators without the need for adapters.
• Wide RPM range of 300–2100 RPM, allowing for quiet operation at low loads and aggressive cooling when needed.
• Airflow up to 61.8 CFM and static pressure 2.51 mmH2O, suitable for both intake/exhaust and dense radiators.
• Noise level up to 30.9 dBA, which is a reasonable compromise for a high-speed fan with such specifications.
• Rifle Bearing for better balance between longevity and lower noise compared to basic sleeve solutions.
• 4 PIN PWM connector for precise RPM control and 3 PIN 5V ARGB Header for synchronization with the motherboard or controller.
• 16 Addressable RGB LEDs, illuminated hub and matte blades for strong and even lighting effects, plus ARGB cable with daisy-chain for easy connection of multiple fans.
• Operates at 12 V, with consumption up to 5.4 W and current 0.15 A, making it easier to plan the load on fan hubs.
• 36 months warranty, providing peace of mind for long-term use in daily builds.

Who it is suitable for

This model is a good choice if you are building a gaming or enthusiast system with a focus on cooling and ARGB synchronization through the motherboard. It is particularly suitable for AIO radiators and front intake configurations, where the combination of airflow and pressure matters. If you are looking for an absolutely silent system at all costs, the maximum 2100 RPM may be too much for you, and you will have to rely on an aggressive PWM profile.

The strongest point here is the combination of high RPM range, stable airflow, and well-implemented addressable RGB lighting in one 120 mm package that you can use flexibly – from case to radiator.