DeepCool 120mm Xfan 120 - 1300prm Fan

DeepCool Xfan 120 is a basic 120 mm fan that works for airflow in the case or as a replacement for an old, noisy fan in a power supply/case. It operates at up to 1300 RPM, which is a moderate speed aimed at balancing cooling and noise. With a flow rate of up to 43.56 CFM (74.01 m3/h) and a noise level of 23.7 dBA, it is suitable for systems where you seek normal cooling without excessive noise. You also get flexible connection options with 3-pin and Molex connectors.

What you get

With dimensions of 120 x 120 x 25 mm, Xfan 120 covers the most popular standard for case fans, so the chance of it not fitting your case is minimal. The Hydro bearing ensures quieter operation and better durability compared to the cheapest sleeve solutions, especially during long operation at 12 V. With a consumption of only 0.84 W (0.07 A at 12 V), the fan hardly loads the power supply, which is a plus in older machines or budget systems. The two connection options – standard 3-pin to the motherboard or Molex directly to the power supply – give you the freedom to control it through the motherboard or simply run it at constant speed.

• Standard size 120 mm, making it compatible with most modern PC cases and fan positions.
• Maximum speed up to 1300 RPM, aimed at balanced cooling without generating excessive noise.
• Airflow up to 43.56 CFM / 74.01 m3/h, sufficient for general airflow in the case or as an addition to already existing fans.
• Noise level 23.7 dBA, which is relatively quiet and suitable for office, home, and budget gaming configurations.
• Hydro bearing for smoother rotation and better durability compared to the cheapest sleeve bearings.
• Dual connectivity with 3-pin and Molex connectors, so you can connect it to both the motherboard and directly to the power supply.
• Low consumption 0.84 W at 12 V / 0.07 A, which minimally loads the power supply even in older systems.
• 12 months warranty from the manufacturer DeepCool, giving you peace of mind for daily use.

Who it is suitable for

This fan is suitable if you are building a budget or mid-range build and need basic airflow for the case, without chasing maximum low temperatures or RGB effects. It is also suitable for replacing an old or noisy fan in an office machine, HTPC, or older power supply/case, as long as it is compatible in size and mounting. It is not the optimal choice if you are making a high-end build with very hot hardware and want the highest airflow or fine PWM control.

If you are looking for a simple, reliable 120 mm fan with decent airflow, low consumption, and flexible connection via 3-pin or Molex, DeepCool Xfan 120 delivers just that without unnecessary extras.