be quiet! LIGHT WINGS LX 120mm PWM high-speed Triple-Pack Fan Pack 3-in-1 3 x 120mm - BL124

be quiet! LIGHT WINGS LX 120mm PWM high-speed Triple-Pack is a set of three 120 mm fans aimed at more serious gaming and enthusiast configurations, where you want both cooling and a clean visual effect. Each fan combines a 300–2100 RPM speed range with Addressable RGB lighting, which you control through the motherboard or a controller. With a maximum of 30.9 dBA, you get quite a bit of airflow relative to the noise, and the black housing looks clean in any case. This is a solution with which you can build a complete airflow from the front, top, or on a radiator.

What you get

With three 120 x 120 x 25 mm fans, you have a ready package for the entire front intake or for a 240/360 mm radiator – without mixing different models. Each fan provides up to 61.8 CFM of airflow and 2.51 mmH2O static pressure, which is important if you will use them through dense mesh filters or thick radiators. Through the 4 PIN PWM connector, you can easily adjust the RPM curves through the BIOS, so that at idle they spin low, and at load they ramp up to 2100 RPM only when really necessary. The 3 PIN 5V ARGB connector gives you lighting synchronization with other ARGB components. The Rifle Bearing bearing is balanced between quietness, long life, and price – suitable for 24/7 running machines.

• A set of 3 x 120 mm fans, sufficient for a complete intake/exhaust setup or a full radiator.
• A wide range of 300–2100 RPM allows for a very quiet mode at low load and aggressive cooling when needed.
• Airflow up to 61.8 CFM per fan maintains stable temperatures even with warmer GPUs and CPUs.
• Static pressure of 2.51 mmH2O makes them suitable for both cases and mounting on radiators.
• Maximum noise level of 30.9 dBA is a reasonable compromise between quietness and high RPM.
• 4 PIN PWM for fine control of RPM and 3 PIN 5V ARGB for full lighting synchronization.
• Rifle Bearing bearing and consumption up to 5.4 W / 0.15 A at 12 V provide good reliability and low load on the fan headers.
• The black color and Addressable RGB lighting allow you to integrate them into both minimalist and full RGB builds.
• 36 months warranty gives you peace of mind for long-term operation.

Who it is suitable for

It is suitable if you are building a gaming or high-performance system and want controllable cooling plus ARGB synchronization with the motherboard. It also works well for AIO/Custom water cooling, where you need static pressure for the radiator. If you are chasing a completely silent machine at all costs and never raise RPM above average, a package with lower maximum RPM might make more sense.

The combination of high RPM range, good pressure, and flexible ARGB control makes this triple-pack a practical choice when you want both effective airflow and a tidy, finished look for your case.