be quiet! LIGHT WINGS LX 120mm PWM high-speed White Fan Pack 3-in-1 3 x 120mm - BL125

be quiet! LIGHT WINGS LX 120mm PWM high-speed White Fan Pack 3-in-1 is a set of three 120 mm case and radiator fans aimed at more serious gaming and enthusiast configurations. They come in white with addressable RGB, allowing you to set up a clean, bright build with synchronized lighting. With a range of 300–2100 RPM, these fans cover both quiet idle and aggressive cooling under load. The combination of 61.8 CFM airflow and 2.51 mmH2O static pressure makes them suitable for both front intake and dense radiators or solid mesh panels.

What you get

You get three identical 120 mm fans (120 x 120 x 25 mm x 3) that you can arrange in a push-pull configuration on a radiator, or cover the front/side/roof of the case. PWM control via 4 PIN connector gives you smooth speed control from the motherboard – from nearly silent 300 RPM to a maximum of 2100 RPM when the GPU and CPU heat up significantly. Thanks to the static pressure of 2.51 mmH2O, the fans perform better with radiators and dust filters, rather than just spinning air in empty space. The Rifle Bearing bearing is a balanced solution between long life and lower noise, and up to 30.9 dBA at maximum speed is a reasonable compromise for a high-speed model. Addressable RGB is controlled via 3 PIN 5V ARGB header on the motherboard or controller, allowing you to synchronize it with the rest of the lighting without additional tricks.

• A set of 3 x 120 mm fans, allowing you to build a complete airflow – for example, intake, exhaust, and radiator simultaneously.
• Operating range of 300–2100 RPM, ensuring the system is quiet during light work and aggressively cooled during gaming or rendering.
• Airflow of 61.8 CFM provides stable cooling for components like powerful GPUs and CPUs in warmer cases.
• Maximum static pressure 2.51 mmH2O, helping air to pass effectively through radiators and dust filters.
• Noise level up to 30.9 dBA at maximum speed – expect noticeable but controlled noise only when the fans are running at full speed.
• 4 PIN PWM connector for precise speed control and 3 PIN 5V ARGB for synchronized, addressable RGB lighting with the motherboard or controller.
• Rifle Bearing bearing for better balance between long life, smooth operation, and lower noise compared to cheaper solutions.
• White color and Addressable RGB, which fit bright and showcase builds with a transparent panel.
• 12 V power supply and consumption of 0.15 A per fan, which is easy for any modern fan header.
• 36 months warranty, providing peace of mind for long-term use in everyday gaming or work.

Who it is suitable for

This set is a good choice if you are building a mid-range to high-end gaming or creator build with good airflow and care about a visually clean, white setup with RGB synchronization. It is also suitable for water cooling, where you need fans with good static pressure for 120/240/360 mm radiators. If you are looking for ultra-quiet low-RPM fans without a focus on high speeds, these high-speed models may be too much for you.

The combination of three fans, high RPM range, solid pressure, and addressable RGB in white makes this set very versatile – you can set it up for both silence and maximum cooling without sacrificing the aesthetics of the build.