be quiet! LIGHT WINGS LX 140mm PWM high-speed Triple-Pack Fan Pack 3-in-1 - BL130

be quiet! LIGHT WINGS LX 140mm PWM high-speed Triple-Pack is a set of three 140 mm fans aimed at more serious gaming and enthusiast configurations, where you want strong airflow and noise control. They operate in the range of 200–1800 RPM, giving you flexibility – from nearly silent operation to aggressive cooling under load. With 75.3 CFM airflow and 2.45 mmH2O static pressure, they are suitable for both cases and radiators. Addressable RGB lighting allows you to connect the lighting to the motherboard or controller and synchronize it with the rest of the build.

What you get – three 140 mm fans with PWM control, allowing the motherboard to automatically control the speeds based on temperature. With up to 75.3 CFM airflow, you can effectively exhaust warm air from the case or cool dense radiators without relying on excessively high RPM all the time. The static pressure of 2.45 mmH2O helps the air pass through filters, radiators, and dense grilles, which is important in more closed front panels. Addressable RGB via 3 PIN 5V ARGB header gives you full control over effects and colors, while the Rifle Bearing is a balanced choice between long life and low noise. All of this operates on standard 12 V, with up to 5.4 W power per fan and maximum noise of 30.5 dBA, which is perfectly acceptable for high-speed 140 mm fans.

• Set of 3 x 140 mm fans (140 x 140 x 25 mm), sufficient to fill the front of a case or to build a complete intake/exhaust setup.
• Wide range of 200–1800 RPM, allowing quiet idle and aggressive cooling under load, controlled via PWM.
• High airflow of 75.3 CFM, suitable for a well-ventilated case and powerful gaming/workstation build.
• Static pressure of 2.45 mmH2O, making the fans effective as coolers for radiators with denser blades.
• Maximum noise level of 30.5 dBA, balanced for a high-speed model, so it doesn't become a major source of noise in the system.
• Rifle Bearing for better durability and smoother operation compared to basic sleeve solutions.
• 4 PIN connector for the fan and a separate 3 PIN 5V ARGB header for Addressable RGB, to synchronize the lights with the motherboard or controller.
• Standard 12 V power supply, consumption of up to 0.18 A / 5.4 W per fan and black color that easily fits most builds.
• Warranty of 36 months, giving you peace of mind for long-term operation.

This set is suitable if you are building a mid-range to high-end gaming or workstation build and want stable cooling for the case or radiator along with RGB visuals under control. If you are aiming for an absolutely silent system at any cost and don't need high RPM potential, perhaps lower RPM models will be a better option.

The combination of high airflow, good static pressure, PWM control, and Addressable RGB in a triple pack makes these fans a practical choice when you are looking for both cooling and visuals without unnecessary compromises.