Fans DeepCool FL12 SE 3IN1 White 3 x 120mm ARGB Halo Fans - R-FL12SE-WHAPN3-G

DeepCool FL12 SE 3IN1 White is a set of three 120 mm ARGB fans for cases, aimed at mid-range gaming and aesthetic builds. You get white fans with ARGB Halo lighting and standard connectors for easy integration with the motherboard or controller. With a range of 400~1900 RPM and airflow up to 50.74 CFM, the set is balanced between cooling and noise. The official warranty of 36 months provides peace of mind for long-term operation.

What you get

The three 120 mm fans use a hydraulic bearing, which means quieter and longer-lasting operation compared to basic sleeve solutions. At up to 1900 RPM and static pressure of 2.04 mmAq, they are suitable for both general airflow in the case and for denser front panels or filters. The noise level of up to ≤28.67 dB(A) is reasonable for a gaming system, especially at lower speeds when the load is light. The ARGB lighting is controlled via the 3 PIN 5V ARGB header on the motherboard or controller, allowing you to synchronize effects with other components. The amperage of 0.1 A and standard 12 V power profile make them easy to integrate into almost any build.

• Set of 3 x 120 mm fans, sufficient for overall airflow in a standard mid-tower case (front intake + rear exhaust or top).
• RPM range of 400~1900 RPM±10%, allowing for both nearly silent operation and more aggressive cooling when needed.
• Airflow up to 50.74 CFM, suitable for gaming systems with a more powerful GPU and several drives.
• Maximum static pressure of 2.04 mmAq, helping air pass through filters and denser front panels without losing much efficiency.
• Low noise level of up to ≤28.67 dB(A), keeping the machine relatively quiet under light load.
• Hydraulic bearing for better balance between durability and acoustics compared to cheaper solutions.
• 4 PIN fan connector and 3 PIN 5V ARGB for lighting, giving you full control through the motherboard or separate controller.
• White color and Addressable RGB lighting for a clean, modern build with customizable lighting effects.
• Warranty of 36 months, covering a long period of daily use.

Who it is suitable for

This set is suitable if you are building a white gaming or streaming build and want both decent airflow and ARGB aesthetics. It is a good choice for mid-range configurations where you want to improve the airflow of the case without making much noise. If you are aiming for an extremely quiet build or have a super limited, hot case, you might consider more specialized solutions, but for mainstream gaming systems, the balance here is more than sufficient.

The most sensible aspect of this set is the combination of three 120 mm fans with hydraulic bearings, controllable speeds, and ARGB Halo lighting in white – everything you need to arrange airflow both visually and functionally in the case.