Fans DeepCool FL12 White Fan Pack 3-in-1 3x120mm ARGB

DeepCool FL12 White Fan Pack 3-in-1 is a set of three 120 mm fans aimed at mid-range gaming and aesthetic builds, where you want a balance between cooling, noise, and appearance. You get a white set with Addressable RGB, ready to connect to a 5V ARGB header or controller, without dealing with incompatible connectors. Each fan operates in the range of 500–2150 RPM, with an airflow of up to 55 CFM and a maximum pressure of 2.82 mmAq, which is completely adequate for case airflow or radiator. Add to that a dynamic fluid bearing for longer life and smoother operation.

What you get

With this set, you cover the entire front intake of most mid-tower cases or an entire 360 mm radiator with even and synchronized ARGB lighting. With up to 55 CFM per fan, you can easily cool a powerful CPU/GPU build or a dense mesh front without choking the airflow. The maximum static pressure of 2.82 mmAq helps the air pass through radiators and finer filters, instead of “returning” to the case. The noise level of up to 32 dBA is a reasonable compromise for 2150 RPM, especially if you set your fan curve so that they do not run at maximum all the time. The 4 PIN connectors for the fan and 3 PIN 5V ARGB for the lighting give you direct control through the motherboard or a separate controller, without non-standard solutions.

• Set of 3 x 120 mm fans, each measuring 120 x 120 x 25 mm, ideal for front, top, or radiator positions.
• RPM range of 500–2150 RPM, allowing for quiet idle and aggressive cooling under load according to the fan profile.
• Airflow of up to 55 CFM per fan provides stable airflow for modern gaming configurations with high TDP.
• Maximum static pressure of 2.82 mmAq helps for more effective cooling of radiators and dense dust filters.
• Noise level of up to 32 dBA at maximum RPM, which is acceptable for performance-oriented cooling.
• Dynamic fluid bearing for greater durability and smoother operation compared to cheaper sleeve solutions.
• Addressable RGB lighting (Addressable RGB) with a 3 PIN 5V ARGB connector for synchronization with the motherboard or controller, in an entirely white design.
• 4 PIN fan connector at 12 V, with a consumption of around 1.8 W and a current of 0.15 A, compatible with standard motherboard headers.
• Warranty of 36 months, giving you peace of mind for long-term use.

Who it is suitable for

This 3-in-1 set is suitable if you are building a white or light build and want both RGB aesthetics and reasonably strong cooling for gaming at higher loads. It is a good choice for 240/360 mm radiators or for cases that need serious intake/exhaust airflow. It is not aimed at ultra-silent enthusiasts who chase the lowest RPMs and absolute minimum noise at the expense of performance.

The combination of white design, strong airflow, and Addressable RGB in a set of three fans makes the DeepCool FL12 White Fan Pack 3-in-1 a very practical solution if you want to organize the cooling and appearance of the case in one go.