DeepCool FL12R Black Reverse Fan Pack 3-in-1 3x120mm ARGB

The DeepCool FL12R Black Reverse Fan Pack 3-in-1 is a set of three 120 mm fans for cases and radiators, aimed at more sensible and organized builds. You get black fans with a reverse rotation direction and ARGB lighting, designed to look good from the "clean" side of the blades. With a range of 500–2150 RPM, 55 CFM airflow, and a static pressure of up to 2.59 mmAq, they are a decent choice for both case airflow and mounting on a radiator. Combined with the dynamic fluid bearing and 4-pin control, you get stable and flexible cooling for long-term operation.

What you get

The three fans, sized 120 x 120 x 25 mm, cover typical positions for front intake, top exhaust, or a 240/360 mm radiator, allowing you to arrange the case airflow according to your scenario. The range from 500 to 2150 RPM allows you to set profiles – a quiet mode at low speeds for idle and more aggressive cooling under load. The static pressure of 2.59 mmAq helps when blowing through dense radiators or dust filters, so you don't lose efficiency. With a maximum of 33.9 dBA at high speeds, you have a good balance between noise and cooling, especially if you control them via BIOS or software. Thanks to Addressable RGB and a 3-pin 5V ARGB header, you can synchronize the lighting with the motherboard or controller without being tied to a specific ecosystem.

• A pack of 3 x 120 mm fans, which is sufficient for a basic airflow setup or for a full push/pull on a more compact radiator.
• A dynamic fluid bearing for better durability and smoother operation across the wide range of 500–2150 RPM.
• Airflow of up to 55 CFM per fan, ensuring adequate exhaust of hot air from the case and supplying fresh air to the radiators.
• Static pressure of 2.59 mmAq, suitable for mounting on radiators or behind dust filters, where air resistance is higher.
• Maximum noise level of 33.9 dBA, which, with a proper fan curve, allows for quiet operation in daily tasks and moderate noise during serious gaming or rendering.
• A standard 4-pin fan connector plus a 3-pin 5V ARGB for lighting, so you can connect them directly to the motherboard or a controller.
• Reverse rotation direction, making the visible side of the blades more aesthetic in configurations where the fans blow towards the glass.
• Black finish with Addressable RGB lighting for easy integration into almost any color theme of the build.
• Low current draw of 0.15 A at 12 V, which spares the motherboard connectors and facilitates branching via a hub.
• 36-month warranty, providing peace of mind for long-term use in 24/7 machines or intensive gaming systems.

Who it is suitable for

This pack is suitable if you are assembling a gaming or work machine with a transparent panel and want to organize the airflow with identical fans at the front, top, or on a radiator. The reverse design is especially useful if you want a clean look from the glass side without seeing the frame and the back of the fans. If you are chasing extremely low noise at maximum speeds or non-standard sizes (140 mm, slim), you will likely need to look at other options here.

The most sensible aspect of this pack is the combination of three 120 mm fans with reverse rotation, stable airflow and pressure metrics, plus ARGB and standard connectors – a ready-made set for an organized, functional, and visually complete build.