Fans DeepCool FL12R White Reverse Fan Pack 3-in-1 3x120mm ARGB

DeepCool FL12R White Reverse Fan Pack is a set of three 120mm ARGB fans aimed at mid-range and more serious builds, where you want a good balance between airflow, pressure, and aesthetics. Each fan measures 120 x 120 x 25 mm, with a white housing and Addressable RGB lighting for synchronization with the rest of the build. The “Reverse” rotation direction is key if you want to see the beautiful side of the fan while the air blows in the right direction. You get a set of 3 pieces of fans, ready for installation in a case or radiator.

What you get
With speeds between 500–2150 RPM, you can adjust the profile from super quiet idle to aggressive cooling under load. The airflow of 55 CFM and maximum static pressure of 2.59 mmAq make them suitable for both front intake through filters and for mounting on a radiator. The noise level of up to 33.9 dBA is reasonable for a fan that spins over 2000 RPM, especially if you control it via PWM. The dynamic fluid bearing helps for longer life and smoother operation compared to basic sleeve bearings. Thanks to the 4-pin PWM connector and 3-pin 5V ARGB header, you can connect the cooling and lighting directly to the motherboard or to a controller and set everything up in the software.

• A set of 3 x 120 mm fans, which is fully sufficient for a complete airflow upgrade of a case or for pushing a 360mm/240mm radiator.
• Speeds 500–2150 RPM allow a wide range from quiet to aggressive cooling depending on your fan profile.
• Airflow of 55 CFM ensures stable removal of warm air from the case even with hotter GPUs and CPUs.
• Maximum static pressure of 2.59 mmAq helps the air to pass effectively through dense radiators and dust filters.
• Noise level of up to 33.9 dBA is typical for high-speed 120 mm fans and can easily be tamed with the right fan curve.
• Dynamic fluid bearing reduces friction and vibrations for longer life and smoother operation.
• 4 PIN PWM for speed control and 3 PIN 5V ARGB for Addressable RGB lighting give you full control from the motherboard or controller.
• Reverse rotation direction is ideal if you want to see the front side and RGB effects while the fan actually intakes or exhausts air in the desired direction.
• White color of the housing and blades fits light, “clean” builds and contrasts well with ARGB effects.
• 36 months warranty provides peace of mind for long-term use.

Who it is suitable for
It is suitable if you are building a white or RGB-oriented build and want combined fans for the case and radiator without thinking separately for each position. A good option for mid-range and high-end systems where you need higher speeds and pressure, but still value aesthetics. It is not the most logical choice if you are looking for a completely silent low-RPM setup and do not care about ARGB and aesthetics.

The most valuable here is the combination of high RPM range, decent airflow and pressure, reverse design, and ARGB, all packed in a white triple pack. With one FL12R White set, you can simultaneously improve cooling and visually finish your case.