Fans Geometric Future Squama 2503B Black Fan Pack 3-in-1 - 1F2503B312000

Geometric Future Squama 2503B Black is a set of three 120 mm fans aimed at gaming and enthusiast cases where you want both cooling and a clean look. The black design with Addressable RGB backlighting gives you plenty of freedom for synchronization with other components. The fans operate in the range of 0–2000 RPM, allowing for both completely silent mode and serious airflow when needed. Thanks to 69.11 CFM airflow and pressure up to 2.92 mmH2O, the set is suitable for both case and radiator.

What you get

The three fans with a size of 120 x 120 x 25 mm provide enough coverage for front intake, top exhaust, or for a 240/360 mm radiator if you are aiming for lower temperatures under heavy load. The operating range up to 2000 RPM and airflow of 69.11 CFM mean that you can blow out warm air from the case even with hotter GPUs and CPUs. The maximum static pressure of 2.92 mmH2O is important if you will use them on a radiator or behind denser filters – the air will actually pass through them, not just spin in front of the mesh. The noise level of up to 29 dBA is decent for this class, especially considering the RPM, and the hydraulic bearing helps for longer life and smoother operation. With a 4 PIN connector and 3 PIN 5V ARGB Header, you can connect them directly to the motherboard or controller and set both speeds and lighting as you prefer.

• Set of 3 x 120 mm fans, covering the entire front of the case or a larger radiator without needing additional units.
• Range of 0–2000 RPM allows for almost silent idle to aggressive cooling under load.
• Airflow of 69.11 CFM per fan helps to quickly expel warm air from the case and lower internal temperatures.
• Static pressure up to 2.92 mmH2O makes them suitable for both case fans and mounting on radiators or behind dust filters.
• Noise level 29 dBA is balanced for gaming and work, without turning the machine into a "turbine".
• Hydraulic bearing provides smoother operation and better longevity than the most budget sleeve solutions.
• Addressable RGB with 3 PIN 5V ARGB Header gives full control over the lighting through the motherboard or controller, allowing you to synchronize effects with other components.

Who it is suitable for

This set is suitable if you are assembling a gaming or enthusiast build and looking for a balanced solution for airflow and lighting in one package. It is also a good choice if you want to replace the stock fans on an AIO or case with something more serious, without going into extreme high-end. If you are looking for a completely silent system under high constant load, you will need to manage the speeds carefully through the motherboard.

The combination of three fans, good airflow and static pressure, hydraulic bearing, and Addressable RGB in one black, clean package makes Geometric Future Squama 2503B Black a very sensible solution for a modern case or radiator setup.