Water Cooling for Processor MSI MAG CORELIQUID A13 240

MSI MAG CORELIQUID A13 240 is a 240 mm liquid cooler for processors, aimed at stable temperatures and quiet operation in mid-range to high-end configurations. With two 120 mm fans and a copper water block, the goal is to keep the CPU under control even under heavier load. Support for sockets AM4, AM5, LGA 1700, and LGA 1851 gives you freedom for upgrades and platform changes. The black design with Addressable RGB easily fits into any builds – from minimalist to full RGB show.

What you get: a 240 mm radiator with two 120 x 120 x 25 mm fans that combine 62.6 CFM airflow with rifle bearing for longer life and lower noise. The pump operates at 3800 RPM ± 10% at DC 12V, ensuring constant liquid circulation and better heat exchange compared to standard air solutions. The copper water block measuring 70.9 x 69.3 x 56.98 mm provides effective contact with the CPU cap, which is critical for multi-core CPUs. The 450 mm length of the tubes allows flexible installation – at the top, front, or even in a larger chassis, without struggling with stretched hoses. The ARGB lighting through the 5V ARGB connector allows synchronization with the motherboard and the rest of the RGB ecosystem.

• Liquid cooling with a 240 mm radiator, suitable for more powerful processors and more compact mid-tower cases.
• Compatibility with CPU sockets AM4, AM5, LGA 1700, and LGA 1851, covering current AMD and Intel platforms.
• Two fans sized 120 x 120 x 25 mm and airflow up to 62.6 CFM for effective heat dissipation from the radiator.
• Copper water block measuring 70.9 x 69.3 x 56.98 mm for better thermal conductivity and stable temperatures under load.
• Pump speed of 3800 RPM ± 10% at DC 12V for reliable liquid circulation and consistent performance.
• Fans with 4 PIN connector and 5V ARGB for PWM control and Addressable RGB synchronization with motherboard and software.
• Tube length of 450 mm in black, providing freedom in positioning the radiator in different cases.
• Type of bearing Rifle Bearing, aimed at quieter operation and better durability compared to standard sleeve bearings.

It is suitable if you are building a gaming or work build with a more powerful CPU and want something more serious than a standard air cooler, without moving to huge 360 mm solutions. It is also a good choice if you care about a clean interior look in the case and synchronized ARGB, but not if you are looking for a maximum budget solution.

The most sensible aspect here is the combination of a 240 mm radiator, copper block, and universal compatibility with modern sockets, plus ARGB control via 5V, making it easy to integrate into almost any modern build.